ADAM Audio A77XB Dual 7 inch 3-way Powered Studio Monitor (Stereo Pair)

(No reviews yet) Write a Review
Free Shipping
Current Stock:

ADAM Audio A77XB Dual 7 inch 3-way Powered Studio Monitor (stereo pair)

Active Horizontal 3-way Near/Midfield Monitor with 2 x 100W 7" Woofers and 50W X-ART Folded-ribbon Tweeter
Adam Audio is now available from STL Pro Audio!
ADAM's AX Range Flagship Near/Midfield Monitor

With power and dispersion characteristics that allow use as both a nearfield and a midfield monitor, the ADAM Audio A77X combines all of the technical innovations in the AX range. An active horizontal 3-way studio monitor, the A77X provides an attractive entree into midfield monitoring with transparent high-frequency reproduction, clear midrange, and superior transient response. The A77X's large, front-baffle bass reflex ports are precisely matched with the bass/midrange drivers, giving the speaker powerful, yet controlled low-end punch. Each of the system's two woofers is each driven by a 100W PWM amplifier; which, in combination with the 50W Class AB tweeter amp, enables a pair of A77Xs to achieve an impressive maximum SPL of 122dB at one meter. Engineered in Berlin to the strictest tolerances, ADAM's AX series monitors feature cutting-edge technology, including the company's renowned, handcrafted X-ART accelerated ribbon tweeter. With its compelling price/performance ratio, the A77X brings ADAM Audio's world-class monitor performance to commercial recording and broadcast facilities and well-equipped home studios alike.

Two 7" carbon/Rohacell/glass fiber bass/midrange drivers

The drivers in ADAM Audio studio monitors benefit from years of in-house research and development and take advantage of the latest advances in technology and materials science. The two carbon/Rohacell/glass fiber bass/midrange drivers in the A77X are engineered to deliver optimized low-frequency reproduction with extended dynamic range and freedom from coloration. They incorporate a rigid, yet low-mass honeycomb driver cone; a highly efficient magnet assembly and precisely aligned voice coil; and an optimized driver chassis/basket design. The bass drivers are integrated into a unique crossover network where both woofers are active up to 400Hz, where one of them rolls off and the other carries the midrange until it crosses over to the tweeter at 3kHz, thus preventing phase cancellation in the critical midrange. Because of this novel arrangement, there are mirror-imaged Left and Right versions of the A77X (A77XA and A77XB; available separately). The A77X's 7" woofers extend response down to 38Hz, making the speaker a suitable choice for nearfield and midfield monitoring in small-to-midsized control rooms

The X-ART folded-ribbon tweeter

Instead of producing sound with a piston-like diaphragm like most loudspeakers, ADAM Audio's X-ART folded-ribbon tweeter uses a pleated diaphragm capable of moving air four times faster than the folds themselves are moving. Handcrafted to the tightest tolerances, the X-ART tweeter delivers ultra-low distortion and breathtaking highs up to 50kHz, enriching the soundfield with stunning detail and faithfully conveying every nuance of the source material so you can work over long periods without listening fatigue. Being handcrafted and meticulously tested in the ADAM’s Berlin laboratories, the X-ART high-frequency driver is a rare exception in these days of automated mass production.

ADAM Audio A77XB Active Near/Midfield Studio Monitor Features:

  • Horizontal 3-way system with 2 x 7" carbon/Rohacell/glass fiber bass/midrange drivers and X-ART tweeter
  • X-ART tweeter, handmade in Berlin and manufactured to the tightest tolerances
  • Large bass reflex ports, volume control, and power switch on the front baffle
  • Highly efficient 250W PWM tri-amplification
  • Linear frequency response of 38Hz–50kHz
  • Maximum peak sound pressure per pair at 1m ≥ 122dB
  • Analog XLR and RCA inputs
  • 2-year warranty; optional extension to 3 years with product registration

STL Pro Audio is an authorised deal for Adam Audio.